Drones
Drones and their accessories.
Showing 20 products
NewENT E-Port Development Kit
The DJI E-Port Development Kit adapter converts a compatible drone's E-Port into standard interfaces (XT30 power outputs, USB 2.0 and UART/PPS signal), making it easy to connect external hardware and carry out SDK development and…
NewNeo Propeller Guard, gray
A clip-on guard for the DJI Neo drone's propellers that encloses them to prevent contact with people or objects, improving flight safety. Compatible with the DJI Neo drone, sold as a pair.
NewFPV Landing Gear
Original DJI landing gear for the DJI FPV drone — a set of two legs plus mounting screws that raise the drone slightly off the ground to protect the body and camera on landing. Easy to attach and remove.
NewMavic 3 Storage Cover
The DJI Mavic 3 Storage Cover protects the drone's gimbal and camera during transport and storage while keeping the propeller blades folded close to the body. It attaches and removes in seconds without any tools.
NewCellular Dongle 2 Mounting Kit (Mini 4 Pro)
A mounting kit for attaching the DJI Cellular Dongle 2 securely to the DJI Mini 4 Pro drone, enabling 4G connectivity during flight. Includes a mounting bracket and connection cable; the Cellular Dongle 2 is sold separately.
NewMini 5 Pro Fly More Combo + DJI RC 2 Smart Controller drone
DJI Mini 5 Pro is a foldable sub-250 g quadcopter featuring a 1-inch 50 MP CMOS sensor, 4K/120fps video recording, a 225° rotating gimbal and omnidirectional obstacle sensing. The Fly More Combo includes the DJI RC 2 controller with…
NewZenmuse H20 Multi-Sensor Camera
The DJI Zenmuse H20 is a triple-sensor gimbal camera payload for the DJI Matrice 300 RTK and Matrice 350 RTK drones. It combines a 20 MP zoom camera (23× hybrid optical zoom), a 12 MP wide-angle camera, and a laser rangefinder in a single…
NewPower SDC to Matrice 30 Series Fast Charge Cable
The DJI Power SDC fast charge cable connects DJI Power-series power stations (Power 500, Power 1000, Power 1000 V2, Power 2000) to DJI Matrice 30 Series TB30 intelligent flight batteries for up to 230 W fast charging in the field. Cable…
NewMatrice 30 Low Noise Propellers R1676
DJI Matrice 30 Series 1676 replacement propellers designed for low-noise operation and high-altitude flight, raising the maximum service ceiling of the Matrice 30 and Matrice 30T to 7,000 m. The package includes one clockwise and one…
NewMatrice 30 Series 1671 Propeller Pair (PART09)
Replacement propellers for the DJI Matrice 30 Series drone (1671 designation, 16-inch diameter). The package includes one clockwise (CW) and one counter-clockwise (CCW) propeller plus mounting screws. Compatible with Matrice 30 and Matrice…
NewPhantom 4 Pro+ V2.0
The DJI Phantom 4 Pro+ V2.0 is a professional-grade aerial imaging drone with a 1-inch 20-megapixel CMOS sensor and 4K/60p video. The Pro+ remote controller has a built-in, very bright 5.5-inch 1080p screen, so no separate smartphone is…
NewAvata 2 Propellers
Replacement propeller set for the DJI Avata 2 drone, including two clockwise and two counter-clockwise propellers with mounting screws. Compatible with DJI Avata 2 only.
NewAvata Propeller Guard
Propeller guard designed for the DJI Avata drone, protecting the propellers, bystanders and surroundings from impact damage when flying in tight spaces. Includes landing gear and mounting screws.
NewM2EA RTK Module (Mavic 2 Enterprise Advanced)
The DJI M2EA RTK Module is an add-on module for the Mavic 2 Enterprise Advanced drone that delivers centimetre-level RTK positioning accuracy for mapping and surveying. It mounts on top of the aircraft and supports NTRIP correction data.
NewMatrice 300 / 350 2110s Propellers
DJI 2110s propellers (CW + CCW) for the Matrice 300 RTK and 350 RTK drones. Foldable 2-blade carbon-fibre composite construction; 53 cm diameter.
NewAS1 Speaker
The DJI AS1 is an aerial loudspeaker for the DJI Matrice 4 series drones, used to make announcements and emergency broadcasts from the air. It mounts via a quick-release attachment, reaches up to 300 metres and supports real-time speech…
NewSmart Controller Screen Mounting Bracket, part 09 (Matrice 300)
DJI screen mounting bracket (Part 09) for the Matrice 300 series Smart Controller Enterprise, used to attach a mobile device or tablet to the controller as a second display. The holder fits devices from 93 to 167 mm (3.66–6.57") wide.
NewMatrice 300 Upward Gimbal Connector
DJI's upward gimbal connector for mounting a single payload (such as a gimbal camera) on top of the DJI Matrice 300 RTK and Matrice 350 RTK drones. It adds an IP44 rating when the payload itself is rated, and attaches via four quick-mount…
NewMatrice 300 Series 2195 High Altitude Low Noise Propeller (Part 15)
DJI's high-altitude 2195 low-noise folding propeller for the Matrice 300 Series drones (including the Matrice 300 RTK). Enables safe flight above 2500 m altitude and is supplied as a pair (one CW and one CCW propeller).
NewA1 Replacement Lens Kit (Double Lens)
Official replacement lens kit for the Antigravity A1 360° camera drone: includes two replacement lenses plus the tools to replace the lens and clean the inner lens. Lets you swap a scratched or damaged lens yourself so your 360° footage…