Audio
Microphones, wireless systems and recording.
Showing 48 / 78 products
NewSPD-HRDC 4-Pin Hirose to 5.5mm Locking DC Power Cable for Sound Bags
The Deity SPD-HRDC is a short power cable for sound bags that connects a 4-pin Hirose (Push-Power) source to a 5.5mm locking DC connector. Compatible with most Lectrosonics DC-powered devices including SR, DSR, M2T, DCR822, DSQD, and IFBT4…
NewC19 Timecode Cable (3.5mm Locking TRS to Din 1.0/2.3) for Canon R5 C / C400
The Deity C19 is a timecode cable that connects a TC-1 transmitter or other 3.5mm timecode source to the Din 1.0/2.3 port on Canon EOS R5 C and C400 cameras. The right-angle locking 3.5mm TRS connector prevents accidental disconnection…
NewC14 Timecode Cable (3.5mm Locking TRS to Lemo 5)
The Deity C14 is a locking timecode cable running from a 3.5mm TRS connector to a 5-pin LEMO connector. It syncs timecode between devices such as Sound Devices audio recorders, Ambient timecode generators/slates, and Arri Alexa cameras.
NewSPD-HR12V Regulated Power Cable (4-Pin Hirose to 12V Hirose)
The Deity SPD-HR12V is a regulated power cable that steps down a 4-pin Hirose-compatible power distribution output to a fixed 12V signal. Designed for professional audio bags and carts where Hirose-equipped devices require a stable 12V…
NewC17 Timecode Cable (3.5mm Locking TRS to Lemo 9)
The Deity C17 is a locking 3.5 mm TRS to 9-pin LEMO timecode cable that feeds timecode — for example from a Deity TC-1 generator — into the 9-pin LEMO timecode input on RED Komodo 6K and V-Raptor 8K/8K XL cameras. Right-angle, locking…
NewSPD-HRT4 Power Cable (4-Pin Hirose to TA4F)
A power cable with a 4-pin Hirose-compatible push-power connector on one end and a TA4F (mini-XLR, 4-pin female) connector on the other. It feeds power from a Hirose-compatible power distributor to TA4-connector devices and is rated for…
NewBNC–BNC RF Cable 45 cm
Short coaxial cable for RF distribution in wireless microphone systems — connects a receiver to an RF distro via straight BNC connectors on both ends. 50 Ω impedance ensures low-loss signal transfer.
NewNano Shield 60Hz Filter Cable 22cm, MZL
A replacement cable for the Rycote Nano Shield system that connects a microphone with an MZL connector (Sennheiser MKH series) to an XLR input and features a switchable 60 Hz low-cut filter for eliminating low-frequency rumble in field…
NewTHEOS DXTX Boom Pole Bracket
A mounting bracket that attaches the Deity THEOS DXTX plug-on transmitter to a standard boom pole without a built-in XLR mount. The bracket fastens to the transmitter via the Neutrik connector screws and clamps securely around the boom…
NewX5 Invisible Mic Cold Shoe
A mounting bracket for the Insta360 X5 that keeps a RØDE Wireless GO / GO II / Me / Pro wireless mic receiver on the side of the camera and out of the 360° field of view. Sandwiches under the camera's 1/4"-20 mount thread with no screws…
NewUniversal Shotgun Microphone Mount 1993B
The SmallRig 1993B is an adjustable microphone mount that attaches to a 15 mm rod and securely holds shotgun microphones with a diameter of 19-25 mm. Its aluminum body and elastic damping material reduce vibration and handling noise while…
NewSC9 TRRS Cable (1.5 m)
The Rode SC9 is a 3.5 mm TRRS male-to-TRRS male cable designed primarily for connecting smartphones to the smartphone channel on the RØDECaster Pro podcast mixer. Compatible with any device featuring a TRRS 3.5 mm jack.
NewSPD-HR25 Power Cable (4-pin Hirose – 5.5/2.5 mm Right-Angle DC Plug)
The Deity SPD-HR25 is a power cable with a 4-pin Hirose-compatible push-power connector on one end and a locking 2.5mm DC barrel jack on the other. This unregulated cable outputs 9–18 V and is suited to powering receivers such as the…
New5-Section Carbon Fiber Boom Pole, 2.6 m (8.5')
Deity's 5-section carbon fiber boom pole for on-location film and video sound: extends to 2.6 m (8.5'), collapses to 70 cm for transport, and weighs only about 540 g. The pole tip has a 3/8" thread for mounting a shotgun microphone or…
New45 cm Right Angle SMA to Right Angle SMA RF Cable
50-ohm RF jumper cable for connecting wireless microphone receivers to antenna distribution units. Right-angle SMA connectors on both ends, 45 cm length.
NewVLog Smartphone Kit, Combo 2
A comprehensive smartphone vlogging bundle comprising the Ulanzi ST-07 phone holder with cold shoe, MT-08 tabletop tripod with ball head, and Sairen VM-Q1 directional microphone with foam and furry windscreens and TRS/TRRS cables.
NewSC21 (USB-C to Lightning 30cm) – Black
The Rode SC21 is a 30 cm cable for connecting USB-C microphones to iPhones and iPads with a Lightning port. MFi-certified and designed exclusively for audio — not for charging or data sync.
NewRM3 Microphone Clip for NT3/NT4 Microphones
The Rode RM3 is an original microphone clip designed specifically for the Rode NT3 and NT4 microphones (also fits the M2 and M3 models). Made from durable thermoplastic, it securely mounts the microphone to a stand without affecting the…
NewHDMI to USB-C Converter
The Rode HDMI to USB-C Converter is a compact 1080p60 capture card that feeds a camera's HDMI output straight into a computer or any other UVC-compatible device. It turns a DSLR or mirrorless camera into a webcam for streaming, video…
NewSC19 (USB-C to Lightning 1.5m) – Blue
The Rode SC19 is a 1.5m USB-C to Lightning accessory cable designed to connect USB-C microphones – such as the VideoMic NTG – to iOS devices with a Lightning port. The cable does not support charging or data sync.
NewSC22 (USB-C to USB-C, 30 cm) – Pink
The Rode SC22 is a high-quality shielded 30 cm USB-C to USB-C cable designed to connect Rode USB-C microphones and audio interfaces to computers, tablets, or phones. Compatible with devices such as the Wireless GO II, VideoMic NTG, and…
NewSC7 TRS–TRRS Patch Cable
The Rode SC7 is a coiled patch cable that converts a microphone's 3.5 mm TRS output to a smartphone or tablet's 3.5 mm TRRS input. Right-angle plugs with gold-plated contacts ensure a reliable connection.
NewLavalier GO Microphone
The Rode Lavalier GO is a lavalier (lapel) microphone with a 4.5 mm omnidirectional condenser capsule and a gold-plated 3.5 mm TRS connector. It is designed to pair with Rode Wireless GO wireless systems, but also works with any device…
NewCOLORS 2 Color Identification Tags for Wireless GO II
The Rode COLORS 2 is a four-color (pink, green, blue, orange) identification kit for Rode Wireless GO, Wireless GO II, Lavalier GO, and smartLav+ microphones. The set includes four lavalier windshields, four cable identification clips…
NewWS5 Windshield / Pop Filter
The Rode WS5 is a foam windshield/pop filter designed for small-diaphragm condenser microphones (including the NT5, NT55, NT6, M5 and TF-5), reducing wind noise and plosives at the microphone capsule. Fits microphones with a capsule…
NewSC19 (USB-C to Lightning 1.5 m) – Purple
The Rode SC19 is an MFi-certified 1.5 m cable for connecting USB-C microphones to iOS devices via the Lightning port. Ideal for use with the Rode VideoMic NTG and other compatible USB-C microphones with iPhone or iPad.
NewSC2, 3.5mm TRS Patch Cable
The Rode SC2 is a short coiled cable with right-angle 3.5 mm TRS (male) connectors on both ends, designed to connect Rode microphones — such as the VideoMic or Wireless GO — to a camera or other audio device with minimal cable clutter.
NewSC17 USB-C to USB-C Cable (1.5 m) – Pink
The Rode SC17 is a flat, Hi-Speed certified USB-C to USB-C cable designed for connecting USB-C microphones and other audio devices to a computer or tablet. Works great with devices such as the Rode NT-USB Mini and RØDECaster Pro.
NewSC19 (USB-C to Lightning 1.5m) – Black
The Rode SC19 is an MFi-certified 1.5 m cable for connecting a USB-C microphone (e.g. VideoMic NTG) to an iOS device with a Lightning port. Designed for audio signal transfer — does not charge or sync the device.
NewPremium 3m HDMI Cable – Orange
The Rode HDMI-3 is a Premium High Speed HDMI cable with Ethernet, supporting up to 4K60 video at 18 Gbps. Compatible with cameras, monitors, computers, and other HDMI devices.
NewSC17 USB-C to USB-C Cable (1.5m) – Red
The Rode SC17 is a flat, shielded USB-C to USB-C cable designed specifically for USB-C microphones and other Rode USB-C devices. The 1.5m length suits both desktop use and live performance, and the flat construction prevents tangling.
New10 m Stereo Audio Cable 3.5 mm
Nedis stereo audio cable with 3.5 mm male connectors at both ends; 10 metres long. Suitable for connecting a phone, laptop or media player to speakers, an amplifier or a car stereo.
NewSPD-HRBATT Power/Data Cable (4-Pin Hirose to Hi-Q Battery Cup)
The Deity Microphones SPD-HRBATT is a power cable for audio professionals that connects a Hi-Q battery cup to a 4-pin Hirose connector, supplying the device with both DC power and battery telemetry – such as voltage, temperature and…
NewNT1 Signature Series Condenser Microphone – Black
The Rode NT1 Signature Series is a large-diaphragm studio condenser microphone designed for professional vocal and instrument recording as well as podcasting. The capsule is internally shock-mounted using a Rycote Lyre system, and the…
NewSC18 USB-C to USB-A Cable (1.5 m)
The Rode SC18 is a Hi-Speed certified USB-C to USB-A cable designed for connecting Rode USB-C audio devices — such as the NT-USB Mini, RØDECaster Pro, VideoMic NTG, and AI-1 — to a USB-A port on a computer or other host device. The…
NewWS3 Windshield
The Rode WS3 is a foam windshield / pop filter designed specifically for the Rode NT3 condenser microphone. It reduces wind noise and plosives during recording.
NewW02 - windshield for S-Mic 2S / S-Mic 3S microphones
The Deity W02 is a short-haired windshield (deadcat) for the Deity S-Mic 2S and S-Mic 3S shotgun microphones. It reduces wind noise during outdoor recording and stays securely in place thanks to an internal rubber gasket.
NewWS14 Pop Filter for PodMic – Green
The Rode WS14 is a high-density foam pop filter designed for the PodMic and PodMic USB microphones, reducing plosives and wind noise. Its low-profile shape stays discreet on camera while giving the mic a splash of colour.
NewWS14 Pop Filter for PodMic – Red
The Rode WS14 is a high-density foam pop filter that reduces plosive "p" and "b" sounds. It is designed to fit specifically the Rode PodMic and PodMic USB microphones, and its low-profile shape keeps it discreet on camera.
NewWS14 pop filter for PodMic – Pink
The Rode WS14 is a high-density foam pop filter designed specifically for the Rode PodMic and PodMic USB microphones. It reduces vocal plosives without affecting the microphone's frequency response, and its low-profile design stays…
NewNTG-2 XLR shotgun microphone
The Rode NTG-2 is a directional shotgun condenser microphone for film, video and field recording. It runs on either P48 phantom power or a single AA battery and connects via XLR, with a switchable 80 Hz high-pass filter to reduce…
NewLavMicro+DC lavalier microphone
The Saramonic LavMicro+DC is a digital omnidirectional lavalier (clip-on) microphone that connects directly to a phone or computer via three interchangeable cable heads: Lightning, USB-C and USB-A. It includes a headphone jack for…
UsedDM-50 Shotgun Microphone
The Canon DM-50 is a directional stereo microphone for Canon camcorders equipped with the Advanced Accessory Shoe. It mounts on the camera's shoe and draws power from the camera with no separate cable, offers selectable shotgun (mono) and…
NewMZW 400 Windshield + XLR Adapter
The Sennheiser MZW 400 is a professional accessory kit for the MKE 400 microphone. It includes a hairy windshield (deadcat) to reduce wind noise and a 3.5 mm jack to XLR adapter for use with professional equipment.
NewWireless Micro wireless audio system for mobile devices – Lightning, black
The RØDE Wireless Micro is an ultracompact wireless microphone system with two clip-on transmitters and a dual-channel receiver that plugs directly into the Lightning port of an iPhone or iPad. Ideal for two-person interview, vlog and…
NewWS14 Pop Filter
The Rode WS14 is a pop filter designed specifically for the Rode PodMic and PodMic USB microphones. Made from high-density foam with a low-profile design, it reduces plosives (p, t and b sounds) in speech and slips into place tool-free.
NewBY-PM500 microphone
The BOYA BY-PM500 is a USB condenser microphone for podcasting, streaming, recording and video calls. It supports both cardioid and omnidirectional pickup patterns and 24-bit/48 kHz resolution, with a USB-C connection, a 3.5 mm headphone…
NewNTG-3 weather-resistant XLR shotgun microphone – Silver
The Rode NTG3 is a professional supercardioid shotgun microphone that connects via XLR to a camera, boom pole or mixer and runs on +48V phantom power. Its RF-bias design makes it almost completely resistant to moisture, suiting dialogue…